Fanning and other replacement bathroom fan technology is a hot topic, with a plethora of ideas and potentials, with one idea already in the pipeline to help Australians keep cool in their hot rooms.
The latest to gain popularity is the ‘HugsCaster’, which will work with the existing fans to help cool down an area and make them less likely to move around.
If you have a new bathroom and need to help your friends, the idea is a pretty smart one, and if you are using a hot tub, you may find the ‘Bathroom’ as a better option.
If there are other hot tubs in your home that are getting colder, you could also install an air-conditioning fan, or use the ‘Hot Water Cooler’ for that matter.
But there is a catch.
It is not yet possible to install a water cooler on a hot water heater, or in a hot-water tub, for that kind of thing, so fans won’t work.
What is more, fans are still quite a long way from being a common feature in homes, which could be a bit of a deterrent.
“Hugscaster” concept The idea behind the ‘hugscasters’ is simple, but it is a bit more complicated than that.
It involves the installation of an air conditioning fan to help circulate the heat generated by the fans in the room.
The fan would be located on the same side of the water heater as the existing fan, which in turn would be on the opposite side of a hot shower or bathtub.
The idea is that if the water is warm, the fan would turn on, and when it is cold, the water will cool.
So, the whole idea is to have the fan turn on automatically and automatically turn off if there is too much heat, or too much cold.
The design is pretty cool, but the execution is not quite as simple.
The ‘hugging ceiling fan’ can only work in areas where there is not much air circulating through the house, meaning it will not work in an indoor or outdoor hot tub.
But the fans can be used in places where the room has plenty of air circulating, and would help keep the temperature within acceptable levels.
“It’s a cool idea, but a lot of the work that goes into this is done by engineers and engineers need to have a lot more patience and have a bit less enthusiasm,” Dr. Michael Dorn, from the Australian Therapeutic Goods Administration (ATGTA), said.
The installation of the fan in a home is not easy.
“There’s a lot to get right before you can actually install this, and there are some issues around the design of the wall, so it’s a bit on the expensive side,” Dr Dorn said.
In addition to the air conditioning fans, there are various heaters, fan belts, and ducts that need to be connected to the wall or heat exchanger.
There are also other items such as plumbing, lighting, and appliances that need special attention.
Dr Doth said it is not a bad idea to take some time to think about what you need to do, but there are a number of things to consider when it comes to your bathroom remodel.
You can get a ‘HUGGER CASTLE’ kit from Home Depot to help get the hang of the installation, but you need some experience.
“You want to make sure that you have the expertise you need, because you need the expertise for your home and you need it in your remodel,” he said.
If a duct is being installed in the bathroom, then you need a professional to install it, and you might want to consider a plumbing company.
“If you want to have something to connect to a heat exchange in your bathroom, you need plumbing and duct work, and then you might also need a specialist, and that’s where the professional is going to be able to help you, because that’s what you want them to do,” Dr Gaudel said.
To learn more about the “HUGGERSCASTLE” kit, you can click here.
The Australian Therapist is a national magazine focused on mental health and wellbeing.
For more information on mental illness, visit the ABC Mental Health Page.