FanLance’s CFM has found that the Corsair RGB fan is not very popular among fans, despite the fact that Corsair has already made some improvements.
CFM’s CFU (Constant Frequency Unit) measurement indicates that the fans are not very powerful.
This is the first time CFM found that Corsair’s RGB fans are very powerful, but not very well rated.
CFU measurements are a useful indicator of fans’ performance, but CFM is still trying to determine if fans have a low CFU rating, a low efficiency rating, or both.
CFB readers can use CFM to compare two fan models, or compare one fan to another.
For the CFM data, CFM uses an independent measurement method, which measures how much airflow each fan produces over a specific length of time.
This gives CFM a more accurate picture of how fans perform in real life.
In addition to the CFU data, FanLane also analyzed fan noise and temperatures.
The CFM analysis reveals that Corsair RGB fans have low noise levels and high temperatures, despite their fan speeds being low.
The fan speed and efficiency ratings for Corsair RGB are lower than their other models, which are also rated lower.
CFD (Concentrated Coolant) measurements also show that Corsair fans are inefficient, as the fans’ cooling capacity is not enough to keep temperatures below 140°F for an extended period of time and the fan is very hot.
CFDM (Conclusive Thermal Dynamics) measurements show that the fan’s temperature rise over time is too high, which is an indication that Corsair is using too much power.
CFL (Concise Linear Load) is a measurement that measures the fan speed as it moves across a surface, which gives the CFB reader a more detailed picture of the fan.
CFN (Consecutive Fans) is another measurement that shows the fan moving at the same speed over time, which shows that Corsair might have too many fans on the market.
CFW (Conveniently Weighted Wattage) measurements indicate that Corsair may have used too much airflow to increase the fan efficiency rating.
CFT (Converting Wattage Units) shows that the CFG is too large.
CFH (Converted Frequency) is the fan noise measurement, which can help with determining the fan performance.
CFF (Convertable Frequency) shows the fans RPM is not constant over time.
CFQ (Conversion Rate) shows how much power the fans draw.
The higher the number, the more power the fan uses.
CFO (Converts Operating Temperature) shows where the fan will be at any given time.
It is important to know that the measurements are taken using a fan, so fans are measured at different temperatures and the CFO value is an estimate.
The power consumption of Corsair RGB is very low.
CFMs FanLase data is based on FanLant’s testing of Corsair’s fans.
CFV (Conversions to Efficiency) shows whether the fan consumes less power or more.
The lower the number the less power the FanLANCE is able to provide.
For example, a FanLANT with a CFV of 50 indicates that it consumes more power than a fan rated at 80 CFV.
CFMS (Conversations per Minute) indicates the fan RPM is changing as it is moving.
This indicates that fans might be using too little power.
For CFM CFM does not have an error correction factor.
The difference between FanLone and FanLace is that FanLances are based on testing of the same fan, which means they are measuring the same part of the noise and heat produced by the fan and do not include any error correction factors.
The FanLACE data shows the Corsair fans to be inefficient compared to other fans.
The Corsair fan has a very low CFF rating and is very noisy.
CFMR (Conclusions of Relative Thermal Activity) shows why Corsair’s fan may be inefficient.
This tells the CFMM reader that fans with lower CFF ratings tend to have more noise and have lower efficiency ratings.